You’ve been tossing dirt out of your Roomba’s bin into the trash after every cleaning. However maintain you checked its filter recently?

how to clean your roombas filter

Ben Patterson/IDG

This day’s Most involving Tech Deals

Picked by TechHive’s Editors

High Deals On Mountainous Merchandise

Picked by Techconnect’s Editors

Ought to you’ve factual been dumping mud, dirt, and debris out of your Roomba’s bin into the trash after which slapping it aid into your real robovac, you’re doing it defective.

It’s easy to ignore, however there’s a filter for the length of the bin compartment, and whenever you happen to’re no longer cleaning it normally—and replacing it on occasion—your Roomba will salvage much less and no more efficient as it sweeps your floor.

Ought to you haven’t been caring for your Roomba’s bin filter, it’s never too leisurely to launch.

The assignment for cleaning your Roomba’s filter differs hoping on which model it is doubtless you’ll well well perchance also simply maintain.

For the widespread 600 series (I in reality maintain a Roomba 675, to illustrate), there’s a crooked filter that sits in the bin itself, whereas 800- and 900-series Roombas maintain an rectangular filter cartridge that suits into the tip of the bin. “E” and “i” series Roombas additionally maintain a filter cartridge, however it’s positioned on the facet of the bin.

Associated: neat a Roomba’s charging contacts and cliff sensors

I’m going to aid you to neat the filter on a Roomba 675, which is one in every of the most neatly-appreciated Roomba objects. Hang a obvious Roomba model? Place studying to salvage the gist of what you’ll must defend out, and don’t peril; I’ll level you to instructions for the other Roomba versions.

Use away the bin and originate it

You’re potentially already conversant in the principle step; simply push the originate button on the tip of your Roomba, then walk the bin out.

how to open roomba bin Ben Patterson/IDG

Just press the yellow stage to originate the bin door on a 600 series Roomba.

If there’s debris in the bin from a prior cleaning (I must admit, I handiest empty the bin factual sooner than a cleaning, now indirectly after one), bolt ahead press the yellow lever to originate the bin door and dump any gunk into the trash.

Associated: The preferrred potential to neat your Roomba’s furry brushes

Faraway the filter

Subsequent, see the nice blue filter, which is doubtless lined in mud.

how to remove roomba 675 filter Ben Patterson/IDG

To defend shut away the bin filter on a 600 series Roomba, squeeze the yellow tabs on either facet of the filter and walk it out. (Bonus functions whenever you happen to also can bet how long since I’d final cleaned my Roomba’s filter.)

With your fingers, grip the 2 yellow tabs on either facet of the filter, squeeze, and pull the filter out.

Natty the filter

Now it’s time to salvage all of the gathered mud and dirt off the filter. One methodology is to knock the mud off by all yet again and all yet again tapping the filter in opposition to the within of a garbage can, or you potentially can attempt scraping the mud off with a dry cloth or paper towel.

clean roomba filter Ben Patterson/IDG

Ah, considerably higher.

Vacuuming the filter (or even higher, the filter cartridge of a series 800, 900, “e” or “i” Roomba) with a hand vac can additionally raise out the trick.

One part you don’t desire to defend out is neat the filter with water; that’s a particular-fire potential to ruin it.

Associated: neat a Roomba’s dirty wheels

Build the filter aid

Once your Roomba’s bin filter now no longer looks to be like utterly disgusting, bolt ahead and walk it aid into the bin. You’re accomplished. Feels staunch, ethical?

how to replace roomba filter Ben Patterson/IDG

Scoot the neat filter aid into your Roomba’s bin, and you’re accomplished—successfully, until subsequent time, anyway.

How most ceaselessly must unruffled you neat your Roomba’s filter?

To defend your Roomba running successfully, you’ll must neat its filter normally. iRobot recommends a staunch filter cleaning once per week, or twice per week whenever you happen to also can simply maintain pets with hair.

If, fancy me, you’re handiest running your Roomba once per week, you potentially can potentially salvage away with cleaning the filter once every couple of weeks.

How most ceaselessly must unruffled you change your Roomba’s filter

Just fancy vacuum baggage, Roomba filters will maintain to salvage replaced every so most ceaselessly. For its allotment, iRobot says you’ll want to unruffled change the filter once every two months.

Now, I do know for a reality that it’s been potential better than two months since I replaced my Roomba’s filter, and it hasn’t burst into flames yet. That stated, I’m potentially going to defend out it quickly, and you in all likelihood must unruffled too.

For example, iRobot sells a three-pack of Roomba 500 and 600 alternative filters for $25, however it is doubtless you’ll well well perchance also pick up reliable Roomba alternative functions on Amazon for steep reductions, alongside with hundreds of third-party alternate choices (factual make certain to maintain a look on the reports sooner than you defend shut from a non-iRobot source).

Links to filter-cleaning instructions for other Roomba objects

Hang a Roomba that’s no longer in the 500 or 600 series? Here are some hyperlinks for instructions on cleaning the filter for other Roomba objects on the iRobot beef up affirm.

neat the leisure of your Roomba

Cleaning your Roomba’s filter is factual the principle step, and we maintain got hundreds of Roomba cleaning how-tos that will well well aid.

For starters, learn to untangle the hair out of your Roomba’s brushes. Subsequent, salvage the news on sprucing its charging contacts and wiping down its cliff sensors. By some means, here’s how to neat your Roomba’s wheels

Reveal: For folks that defend shut one thing after clicking hyperlinks in our articles, we are in a position to also simply salvage a miniature price. Read our affiliate link protection for further miniature print.

Ben has been writing about skills and user electronics for better than 20 years. A PCWorld contributor since 2014, Ben joined TechHive in 2019, where he covers gorgeous dwelling and residential entertainment products.