The two-Sprint Raspberry Pi Compute Module 4 Launches at Moral $25
Desire a smaller version of the mammoth-mighty Raspberry Pi 4? The Raspberry Pi Basis just launched its fresh Raspberry Pi Compute Module 4, a bare-bones SoC that packs unbelievable efficiency in a 2.16 by 1.57-dawdle salvage element. The Compute Module 4 is on hand now starting at $25.
The Raspberry Pi Compute Module 4 is practically twice as like a flash as its predecessor, the Compute Module 3+. It sports the same 64-bit 1.5 GHz quad-core BCM2711 processor as the entire-sized Raspberry Pi 4, and gives dual HDMI output with VideoCore VI graphics for 4K 60FPS decoding and 1080p 30 FPS encoding.
Need some extra horsepower? The Pi Compute Module 4 is available in 32 configurations ranging from $25 to $90. The most rate-efficient “Lite Model” Module 4 has just 1GB of RAM with no wireless connectivity, while extra pricey alternate choices comprise up to 8GB RAM, 32GB of flash storage, and no longer obligatory wireless connectivity.
Sadly, the Compute Module 4’s up so some distance salvage element and perpendicular connectors destroy compatibility with older equipment. While you wish so that you can add ports to your Module 4 computer, put collectively to shell out a further $35 for the fresh Compute Module 4 I/O Board. It comes with two HDMI ports, a Gigabit Ethernet jack, two USB 2.0 ports, a PCIE Gen 2 x1 socket, a 40-pin GPIO connector, a 12-volt barrel jack, digicam and masks connectors, and a MicroSD slot. The Pi Basis also sells a brand fresh Compute Module 4 Antenna Equipment for commercial settings and robotics.
The Raspberry Pi Compute Module 4 goes on sale October 19th for $25. Quiet, some retail outlets haven’t added the Compute Module 4 to their websites. Test again tomorrow if it is possible you’ll maybe maybe also’t bag the Compute Module 4 on websites adore CanaKit or Newark.
Source: Raspberry Pi Basis by ZDNet